Microchip Others Driver Download For Windows

Posted on  by admin
  1. This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from drivers without restrictions. ASIO4ALL 2.14 is available to all software users as a free download for Windows.
  2. Download drivers to communicate with NI products or third-party instruments. GPIB, serial, USB, and other types of instruments.
  3. Microchip Gallery enables easy distribution of software, i.e. Extensions, utilities, plugins, etc., to all Microchip customers. Use this portal to upload and manage your software for distribution. It is open for anyone who wants to distribute software that enhances the development ecosystem used for AVR, PIC8, PIC16, PIC32 and SAM development.
-->Driver

Right click on the hardware device you wish to update and choose Update Driver Software 3. Choose to select the location of the new driver manually and browse to the folder where you downloaded the.

A boot-start driver is a driver for a device that must be installed to start the Microsoft Windows operating system. Most boot-start drivers are included 'in-the-box' with Windows, and Windows automatically installs these boot-start drivers during the text-mode setup phase of Windows installation. If a boot-start driver for a device is not included 'in-the-box' with Windows, a user can install an additional vendor-supplied boot-start driver for the device during text-mode setup.

To install a device that is required to start Windows, but whose driver is not included with the operating system, a user must do the following:

  1. Install the device hardware and turn on the computer.

  2. Begin your Windows installation (run the Windows setup program). During the text-mode phase of the installation (at the beginning of the installation), Windows displays a message that indicates that you can press a specific Fn key to install a boot-start driver.

  3. When Windows displays this message, press the specified Fn key to install the boot-start driver and then insert a boot-start driver distribution disk.

Note This procedure demonstrates how you can install a driver that is not included 'in-the-box' with Windows. Do not use this procedure to replace or update a driver that is included with Windows. Instead, wait until Windows starts and use Device Manager to perform an 'update driver' operation on the device.

When Windows fails to start, certain error messages that are displayed can indicate that a boot-start driver is missing. The following table describes several error messages and their possible causes.

Error messagePossible cause

Inaccessible boot device

The boot disk is a third-party mass-storage device that requires a driver that is not included with Windows.

Setup could not determine your machine type

A new HAL driver is required. This error does not occur on most machines, but it might occur on a high-end server.

Setup could not find any hard drives in your computer

The required boot device drivers for the hard drives are not loaded.

Boot-Start Driver Distribution Disk

A boot-start driver distribution disk is a medium, such as a floppy disk or USB flash drive, that contains a TxtSetup.oem file and the related driver files. The TxtSetup.oem file is a text file that contains a list of hardware components, a list of files on the distribution disk that will be copied to the system, and a list of registry keys and values that will be created. A sample TxtSetup.oem file is provided with the Windows Driver Kit (WDK), under the src directory of the WDK. For details about the contents of a TxtSetup.oem file, see TxtSetup.oem File Format.

The following requirements and recommendations apply to platform-specific and cross-platform distributions disks:

  • Platform-specific distribution disks (Windows Server 2003 and earlier)

    Windows requires a platform-specific distribution disk for each platform that a driver supports. A platform-specific distribution disk contains one TxtSetup.oem file and the related driver files. The TxtSetup.oem file must be located in the root directory of the distribution disk.

  • Cross-platform and platform-specific distribution disks (Windows Server 2003 Service Pack 1 (SP1) and later versions)

    Windows supports cross-platform distribution disks that contain two or more platform-specific TxtSetup.oem files and the related driver files.

    To distinguish between platforms on a cross-platform distribution disk, use the platform directories that are listed in the following table.

    PlatformPlatform directoryDefault directory

    x86-based

    A:i386

    A:

    Itanium-based

    A:ia64

    A:

    x64-based

    A:amd64

    A:

On a cross-platform distribution disk, Windows uses the platform-specific TxtSetup.oem file that is located in the platform directory that corresponds to the platform on which Windows is running. If a corresponding platform directory that contains a platform-specific TxtSetup.oem file does not exist, Windows uses the TxtSetup.oem file in the default directory, if one is present.

Download

Microchip Others Driver Download For Windows 8.1

Microchip Others Driver Download for windows

Windows also supports platform-specific distribution disks. A platform-specific distribution disk contains one platform-specific TxtSetup.oem file and the related driver files. The TxtSetup.oem file must be located either in its corresponding platform directory, as is done for cross-platform distribution disks, or in the default directory of the distribution disk.

The driver files for a given platform on a cross-platform distribution disk or on a platform-specific distribution disk must be located relative to the directory that contains the platform-specific TxtSetup.oem file.

Microchip Others Driver Download For Windows 8

Tip Although not required, we recommend that a TxtSetup.oem file always be placed in a corresponding platform directory. Using platform directories eliminates the possibility that Windows might attempt to use a TxtSetup.oem file that is incompatible with the platform on which Windows is running. For example, if a user attempts an unattended installation on a platform with a distribution disk that does not contain a corresponding platform directory, Windows cannot determine whether the TxtSetup.oem file in the default directory is compatible with the platform. If a driver fails to load because the driver is incompatible with the platform, Windows displays an error message and terminates the unattended installation.

Microchip Others Driver Download For Windows

Operating SystemCurrentPreviousNotes
InterfaceDriver RevisionInterfaceDriver Revision
• RS-232
• USB
UniWinDriver708.zip
7.08 Driver Manual
• RS-232
• USB
EEPROM support available
• RS-232
• USB
• PS/2
6.20cs
6.20cs XPe
N/ALegacy TSHARC Driver
Touch Base Drivers• RS-232
• PS/2
• USB
Available for
Download
WinCE, WinXP/7/8,
WinXPe/7e,Linux,
MacOS
Win CE Net 4.2• RS-232
• PS/2
• USB
WinCE4.2 118a
Drivers Manual
• RS-232
• PS/2
• USB
WinCE4.2 1.16
Drivers Manual
WinCE 5.0• RS-232
• PS/2
• USB
WinCE5.0 1.18b
Drivers Manual
• RS-232
• PS/2
• USB
WinCE5.0 1.16
Drivers Manual
WinCE 6.0• RS-232
• PS/2
• USB
WinCE6.0 118b
Drivers Manual
N/A
Linux• RS-232
• PS/2
• USB
3.23
Drivers Manual
• RS-232
• PS/2
• USB
3.04c
Drivers Manual
3.23 recommended for kernels 2.6.27 and later
Linux• RS-232
• UART (TTL)
V 102
User Guide
N/AOpen source kernel code for Linux development
Linux• RS-232
• PS/2
• USB
2.07N/ARecommended for legacy support of older Linux distributions
MacOS9• USB1.06N/A
MacOSX• USB• Motorola 1.04
• Intel & PPC 2.1.0
• USB1.03
2.00
Windows ME
Window98
• RS-232
• PS/2
• USB
UniWinDriver620cs.zip
Drivers Manual
• RS-232
• PS/2
• USB
6.19cs
6.19cs Manual
Windows 95• RS-232
• PS/2
• USB
• BUS
5.04c
Drivers Manual
• RS-232
• PS/2
• USB
• BUS
5.04b
Drivers Manual
Windows 3.1x• RS-232
• PS/2
• USB
3.01
Drivers Manual
N/A
Win NT 4.0• RS-232
• PS/2
• USB
5.00
Drivers Manual
• RS-232
• PS/2
• USB
4.01b
Win CE 3.x• RS-232
• PS/2
• USB
1.10
Drivers Manual
1.09
Win CE 4.0• RS-232
• PS/2
• USB
x86 driver
GEODEx86_1.00
ARMV4I Intel Xscale
N/A
Win CE Net 4.1• RS-232
• PS/2
• USB
x86 101N/A
DOS• RS-232
• PS/2
3.04c
Drivers Manual
• RS-232
• PS/2
• BUS
3.30